Specifications

29
PF1148-03
S1C33240
32-bit Single Chip Microcomputer
High-speed 32-bit RISC Core
Multiply Accumulation
10-bit ADC
Built-in RAM
High-speed DMA, Intelligent DMA
Twin-clock Oscillator
Built-in Flash Memory
DESCRIPTION
The S1C33240 is a CMOS 32-bit microcomputer composed of a CMOS 32-bit RISC core, Flash, RAM, DMA,
timers, SIO, PLL and other circuits. The S1C33240 can be operated with high speed and spend little current.
With the ADC, PWM and the MAC function, the S1C33240 is suitable for voice applications, PDAs and OA
products such as printers.
FEATURES
CMOS LSI 32-bit parallel processing ............. S1C33000 RISC core
Main clock ....................................................... 40MHz (Max., up to 10MHz external clock input)
Sub clock ........................................................ 32.768kHz (Typ., crystal)
Instruction set.................................................. 16-bit fixed length, 105 instructions
(MAC instruction is included, 2 cycles)
Internal RAM size............................................8,192 bytes
Internal Flash memory size............................. 131,072 bytes (Accessible with 0 wait states for up to 20MHz)
Can be erased and programmed using the S5U1C33000H
and S5U1C33000C.
Clock timer ...................................................... 1 channel
Programmable timer ....................................... 8 bits × 4 channels and 16 bits × 6 channels
PWM timer ...................................................... Realized with a 16-bit programmable timer
Watchdog timer ............................................... Realized with a 16-bit programmable timer
Serial interface ................................................ 4 channels
Clock synchronization type and asynchronization type are
selectable. Usable as an infrared ray (IrDA) interface.
10-bit A/D converter ........................................ Successive approximation type, 8 input channels
High-speed DMA............................................. 4 channels
Intelligent DMA................................................ 128 channels
I/O port ............................................................Input port : 13 bits
I/O port : 29 bits
Pins are shared with the inputs and outputs of built-in
peripheral circuits.
Interrupt controller...........................................External interrupts : 10 types
Internal interrupts : 29 types
External bus interface ..................................... 24-bit address bus, 16-bit data bus, 7 chip enable pins
DRAM and burst ROM may be connected directly.
Shipping form .................................................. QFP5-128pin
Supply voltage ................................................ Core voltage : 2.7 to 3.6V
I/O voltage : 2.7 to 5.5V
Current consumption ...................................... SLEEP state : 16µA
(3.3V, 32.768kHz, clock timer run state, Typ.)
RUN state : 65mA (3.3V, 40MHz Typ.)
This model is under development, therefore the contents of the above specifications may be revised at final.
PreliminaryPreliminary