System information

__________________________________________________
Blastware Compliance Module
Blastware Operator Manual 4–39
(7) Histogram Printout
The setting configures how the Blastmate III printer prints histogram Events. Choose
Graphics to print a histogram for each recorded interval. Choose Tabular Data to print
numerical results of the data analysis for each interval. If you do not require printing of
histogram record mode results, choose None.
(8) Command Buttons
To choose one of the command buttons, click the mouse pointer on the button.
i Cancel
Exit the Printer Setup dialog box and return to the Blastware Main Menu. You are
prompted to send your changes to the unit.
ii Send To Unit
Transfer your settings to the monitor.
i. Setup Files
To display the Library Files dialog box, open the Unit, Setup, Compliance Setup menu and
select the Setup Files tab.
The Setup Files dialog box allows you to load and save settings from your PC or the unit,
and to specify any changes you have made to be the default settings. These files have a .set
file extension.
(1) Read Setup
i From Disk
Load a saved setup file from your PC. Locate previously saved setup files and load them to
affect the unit currently connected to your PC by clicking on Send to Unit.
ii From Unit
Load the setup library files that are currently being used on the unit connected to your PC.