System information

Blastware Compliance Module
___________________________________________________
4–34 Blastware Operator Manual
(7) Job Number
Enter a job number. Job numbers range from 1 to 9999. Double click on the Job Number box and
enter a new job number.
(8) Enable Scaled Distance
Check this box to enable the recording of scaled distance information with each Event. Enter the
Distance from blast and the Charge Weight. Blastware automatically calculates and displays the
Scaled Distance value. The value appears both within this dialog box and on Event Summary
Reports.
(9) Distance from blast
Enter the distance from the monitor to the blast in feet or meters.
(10) Charge Weight
Enter the charge weight of the blast in pounds or kilograms.
(11) Scaled Distance
The Scaled Distance result appears within this dialog box and on Event Summary Reports.
(12) Command Buttons
To choose one of the following command buttons, click the mouse pointer on the button.
i Cancel
Exit the dialog box and return to the Blastware Main Menu.
ii Send To Unit
Transfer your settings to the monitor.
f. Special Setups (Micromate)
Refer to Special Setups within the Compliance Setup for Series IV, Section 4.2.3.
g. Special Setups (Series II and III)
To display the Special Setups dialog box, open the Unit, Setup, Compliance Setup menu and
select the Special Setups tab.
The Special Setup dialog box includes setting the timer, self check mode and time, when Sensor
Check operates, measurement units, microphone units, time format, Backlight on Time, Power
Saving Timeout, and the Monitoring LCD Cycle. After you have entered your settings in each
dialog box, choose Send to transfer your settings to the monitor.