System information

_______________________________________________________________________
Index
Blastware Operator Manual I−5
Report Title, changing in the PC Report, 4–2
Reset Unit (Series III), 4–70
Resolution, Advanced Module, 6–12, 6–18
Retries
Monitor to Computer, 4–13
Monitor to Modem, 7–5
RMS, displaying on cursor, 6–73
Router, 4–15
S
Sample Rate
Advanced Module, 6–13, 6–20
Compliance Module, 4–24, 4–27, 4–45, 4–46
Sample rates available on monitor, 6–13
Save Process File, Advanced Report, 6–24
Save Scaled Distance File, 4–73
Save, Compliance Graph Editor, 6–46
Save, Events List Box, 4–146
Scale, 6–32
Scaled Distance, 4–71
air blast graph, 4–79
create new file, 4–71
cube root graph, 4–79
delete events from file, 4–75
displaying graphs, 4–75
find duplicate events, 4–75
load file from disk, 4–73
print file, 4–73
save file, 4–73
square root graph, 4–75
technical description, 4–80
Scaled Distance Calculator, 4–77
Scaled Distance Table, 4–77
Scaled Distance, Enable
Series II, 5–9
Series III, 4–34, 4–48
Select Channels, Advanced Module, 6–10, 6–18
Selecting a Serial Port, Series II, 5–2
Self Check Mode
Series II, 5–10
Series III, 4–36
Sensitive, 6–16
Sensitivity (Units/Volt), Advanced Module, 6–11, 6–18
Sensorcheck
choosing when to run (Series II), 5–11
choosing when to run (Series III), 4–36, 4–57
Printing with the Monitor, 4–38
Series II, 5–11
Series III, 4–61
speed up recording, 4–36, 4–57
Serial Numbers, 4–128
Series II, 5–1
Connecting monitor to PC, 5–1
Selecting a Serial Port, 5–2
Series II Event Manager, 5–2
Settling Time, 6–15
Setup Unit, Auto Call Home, 4–87
Shift, 6–26
Show Mic in dB
PC Report, 4–6
Show Waveform Grid Lines, 4–3
Signature Hole Analysis, 2–2, 6–58, 6–62, 6–63, 6–64, 6–67,
6–68, 6–69, 6–70
Single Shot Record Mode
Series II, 5–5
Series III, 4–26, 4–41
Slope, displaying on cursor, 6–73
Slow, 4–42, 6–37
Smooth, 6–35
Software Modules, 2–1
Sound Level Microphone, 4–8, 4–9, 4–10, 4–42, 4–85, 6–15
Sound Monitoring, 4–9, 6–37, 6–74
Source Waveform, Linear Superposition, 6–61
Special Setup, 4–34, 4–49
Square Root Graph, Scaled Distance, 4–75
Starting BlastWare III, 1–6
Starting monitoring
Series II, 5–13
Series III, 4–64
Static IP, 4–15
Static IP Address, 4–15, 4–16, 4–19, 4–20, 4–21, 4–22
Static IP Mask, 4–15
Status of monitor
Series II, 5–10
Series III, 4–61
Storage Mode
Advanced Module, 6–13, 6–20
Compliance Module, 4–28
Series II, 5–6
Subtitle, Compliance Graph Editor, 6–48
Subtract, 6–25
Synthetic Waveform, 6–58
System Info, 4–132, 6–75
System Requirements, 1–1
T
Taper, 6–31
TCP/IP, 4–15, 4–96, 4–97, 4–98
TCP/IP Communications,
4–98
Test
Monitor to Computer, 4–14
Monitor to Modem, 7–6
Test Modem, Auto Call Home, 4–121
Test Wave, 6–34
the Use data from, 6–36
Third Octave, 6–35, 6–36
Time
adjusting for Series III, 4–63
setting for Series II, 5–12
setting for Series III, 4–62
Time Delay, adding to Zoom Data Plot, 6–7
Time Display Format, choosing for the PC Report, 4–6
Time Domain Waveform Printing, 6–21
Time Format, Monitor (Series III), 4–36, 4–57
Time Scale Control, Analysis Window, 6–3
Timeline Handling, Linear Superposition, 6–61
Timelines, Analysis Window, 6–3
Timer Mode
Series II, 5–9
Series III, 4–35
Tools Menu
Compliance Module, 4–71