System information

Blastware Compliance Module
___________________________________________________
4–4 Blastware Operator Manual
(14) Represent Histogram Using Lines
To display the Histogram as lines instead of a filled bar chart graph, click on the checkbox to
display a checkmark. If you would rather view the filled bar chart style, click on the checkbox to
remove the checkmark.
(15) Include PVS on Event Report
To include the Peak Velocity Sum (PVS), click on the checkbox to display a checkmark. If you do
not require the PVS results, click on the checkbox to remove the checkmark.
(16) Flex Event Compliance Warning (Series III Only)
If an Event has been recorded using the Flex mode, and this checkbox has been selected, the
following dialog box will appear. Flex Events will only display compliance channels – advanced
channels must be viewed within the Analysis screen. If you do not require this function, click on
the checkbox to remove the checkmark. An option is provided to remove this dialog prompt.
(17) Show Channel Test Waveform
To include the Sensor Check at the end of the waveform, and the frequency and overswing ratio in
the Geophone Summary, click on the checkbox to display a checkmark.
Waveform on Event Report with show Channel Test Form not selected: