System information

_____________________________________________

Blastware Compliance Module

Blastware Operator Manual 4–1

4. BLASTWARE COMPLIANCE MODULE

This chapter provides instructions to use the Blastware Compliance Module. It provides

instructions to transfer, list, copy, delete, print, and view Events. It also includes procedures to set

up your Series III, Minimate Blaster, Series IV or Micromate and customize the Event Summary

Report. The Main Window contains the Blastware Main Menu, an Icon Toolbar, and other

standard Windows controls. You access all Blastware commands from the main window.

The Blastware Main Menu contains several commands to program the unit. After you have

changed the setups, Blastware can transfer the changes to the monitor. In order for Blastware to

complete this successfully, a unit must be connected to the computer using the communication

cable that was provided with it. Before you enter this menu and attempt to change the setups,

connect a monitor to your computer

4.1 File Menu

File Menu contains several commands; Event Manager, Report Options, Close, Print, Print

Preview, Print Setup, and Exit. The Close, Print, Print Preview, and Print Setup commands

are only available if you have a Report open.

4.1.1 Event Manager – Compliance Module

If you have a Report open, you can access the Event Manager by clicking on the Event Manager

command in the File Menu. This will bring the Event Manager to the forefront. Or, if you have

closed the Event Manager, clicking on this menu selection will reopen the Event Manager

window.

Event List BoxDirectories List Box

Event Manager

Icon Toolbar

Blastware Main

Menu Icon Toolbar

Blastware Main Menu

Select Unit T