System information

Blastware Advanced Module
____________________________________________________
6–6 Blastware Operator Manual
Average
Displays the average value between the two cursors
Slope
Indicates the point to point slope of the waveform between the two cursors
Regression
Displays the slope as calculated by a linear regression between the two cursors
d. Plot
Return the Zoom Data Plot window to its original zoom window, or perform multiple zooms.
(1) Restore
Restores the Zoom Data Plot window to the initial zoom settings selected in the Waveform
Analysis window, while maintaining the position of the Analysis Cursors of the last selected
zoom.
(2) Zoom
The Zoom command increases the size of the waveform located between the cursors. You can also
zoom in on a waveform using the mouse. Click and hold down the right mouse button and drag to
create a box over the area to be enlarged; then release the button.
e. Draw
The Draw menu contains various commands to insert annotations on the Zoom Data Plot window.
You can add Slope Lines, Notes, Arrows, and Time Delays.
(1) Slope Line
Add Slope Lines within the Zoom Data Plot window to assist in annotating multiple slopes. Lines
may also be added using the Line button in the upper right hand corner of the Zoom Data Plot
window. Once the line is created, it may be moved by the click-and-drag method. Place the cursor
cross-hairs over the light gray ball at either end of the line, and move to the desired location.
i New
Select this command and then click and hold down the left mouse button at the beginning of the line.
Drag the line to the desired location, and release the button. The annotation updates as the line is moved
until the mouse button is released, allowing for accurate placement.
ii Delete
Delete Slope Lines and related annotations by selecting the Delete command, then clicking on either
gray ball at the end of a Slope Line.
(2) Paste Note
Paste Note allows you to create, edit, and move notes of up to 120 characters within the Zoom
Data Plot window. The Paste Note command is also available by using the Note button in the
upper right hand corner of the Zoom Data Plot window. Once the text is created, it may be moved
by the click-and-drag method. Place the cursor over the text and move to the desired location.
i New
Places a note in the Zoom Data Plot window. After selecting this command, place the cursor in the
desired location and click the left mouse button once. The Text Parameters dialog box appears: