System information

__________________________________________________
Blastware Compliance Module
Blastware Operator Manual 4–125
(4) Serial Number
This field displays the monitor serial numbers for the Blastware Mail account. To enter or change
a serial number, click on the Edit button (see Editing Mail Delivery below for details). The
character “*” indicates that results from any monitor will be forwarded as e-mail. The dialog box
can only display five entries at a time: use the scrollbar to move up or down the list.
(5) Description
This displays the description for the account, as entered in the Edit Mail Delivery dialog box. This
entry cannot be edited here. Click on the Edit button to enter or change the description (see Editing
Mail Delivery below for details).
(6) Edit
Within the dialog box accessed from this button, you can define which information will be sent to
an e-mail address — the entire Event file, or selected data for each channel. You can send
different information to different recipients, and choose to time-delay distribution. Cell phone
users can automatically receive peak velocity or acceleration information for each channel (see
Editing Mail Delivery below for details).
To create a new Blastware Mail account, click on the Edit button of a blank entry.
(7) Time, Serial No., Address, and Action message window
This shows the results of each Blastware Mail session based on the settings that you have made
within the Edit Mail Delivery dialog box. This log is refreshed with each new Blastware Mail
session.
(8) Email Subject
Define what will be in the subject area of the e-mail by selecting one of the following options:
i Peaks
The Peaks command displays the Unit Serial Number, Transverse (Tran), Vertical (Vert) and
Longitudinal (Long) Peak information. The Mic, Date, and Time are also included. The following
is an example of the information that would be shown in the subject line of an e-mail when Peaks
is selected:
BE6412 T:5.59 mm/s V:13.2 mm/s L:2.79 mm/s Mic:4.25 pa.(L), Nov 24 /00 2:55:55 PM
ii User Text
Input your own text message, up to 85 characters, that you would like to appear in the subject line
of the e-mail(s).
(9) Exit
Exit Blastware Mail.
(10) Configure
The information required to complete the configuration settings can be located within your
Windows Internet connection and email program configuration settings, or by contacting your
Internet service provider.