User manual

Sawgrass Technologies, Inc. Hybrid Getting Started Guide for the EPSON Stylus PRO 4880

Setup Instructions – Windows XP / Vista

The 4880 Hybrid system comes supplied with a single CD that includes

both the ChromaBlast and PowerDriver IQ drivers and documentation. The

installation will autostart once the CD is placed in the computer. The

process begins with the ChromaBlast driver and continues to the

PowerDriver. On-Screen instructions will prompt the user to register the

software before full installation can begin.

System Requirements

Minimum Hardware and Recommended Operating System:

Pentium 4 – 3.0GHz or Athlon XP 3000+ Processor

1 GB RAM (2 GB recommended) Windows XP / Vista

30 GB of Free Hard Disk Space for Software and Processing Files

Product Overview - ChromaBlast

The ChromaBlast 4880 Driver™ v1.0 is color management software that

has been written as a Windows printer driver. It is designed to work with

Epson ink-jet printers and Sawgrass ChromaBlast

™

ink. The installation

program will install Sawgrass color management software, the Sawgrass

ChromaBlast™ printer driver software, and ColorSure tools and utilities.

Quick Start

1. Unpack and setup printer as described in the Epson manual.

2. Install the Epson printer driver and verify printer operation.

3. Insert the 4880 Hybrid Driver v1.0 CD into the CD-ROM drive on

the computer to begin the installation process.

Step By Step Installation – ChromaBlast Driver

To get started printing as soon as possible, these are the steps

Sawgrass recommends you perform while setting up your hybrid printer

driver software.

1. Setup the printer according to the Epson instructions.

2. Install the SubliJet and ChromaBlast inks.

3. Install the Epson printer driver. According to the Epson user’s

manual.

4. After the Epson driver is installed, check to see which port the

printer is set to: