User`s manual

the same position.

Horizontal scroll mode: The cursor will remain stationary.

9.10 Move cursor to home position

The cursor will move to the left-end position of the upper line

9.11 Move cursor to left-most position

The cursor will be moved to the left-end position of the current line.

9.12 Move cursor to right-most position

The cursor will be moved to the right-end position of the current line.

9.13 Move cursor to bottom position

The cursor will be moved to the right-end position on the lower line.

9.14 Move cursor to specified position

The cursor will be moved to the x column on the y line.

9.15 Initialize display

The data in the input buffer will be cleared and reset from default.

9.16 Reset the window

Reset the window on the display. When s=0, window is cancelled (values:

x1, x2, and y are not required.)

When s=1 the window will be reset (values: x1, x2, and y are required.) The

x1 and x2 set the position of the left column and right column, respectively,

of the window. The y sets the upper line or the lower line of the window.

This function is valid within the horizontal mode.

9.17 Clear display screen, and clear string mode

All the display characters will be cleared, and the string mode will be

cancelled.