User`s manual

16
16
4.5.3. Interface
Below illustrate the configuration of Stand Alone VFD Pole Display base.
Figure of Stand Alone Pole Display Base
Interface connector on the bottom of Pole Display Base (standard )
CN2 CN3 CN6
CN2: RS-232C connects to PC/Host
CN3: Connect to display panel
CN6: Power supply connector
CN1,CN4, CN5: No used
Power Supply Connectors
CN6 / Connector type: DC jack (5.5/2.1)
Interface connector on the bottom of Pole Display Base (option )
CN6 CN5 CN4 CN3 CN2 CN1
CN2: Power input connector from adapter (range from 9-35VDC,
Manufacture offer +12V power adapter)
CN3: RS-232C connect to printer (Reserved)
CN4: Connect to display panel
CN5: RS-232C connect to PC/Host
CN1,CN6: 24Vdc power supply pass-through connects (option)