User manual

20
8.4. Command Type Setting Command
STX 05 C n ETX
/Change the command type setting/
ASCII Format STX 05 C n ETX
Dec. Format [02] [05] [67] n [03]
Hex. Format [02h][05h][43h] n [03h]
30h≦ n≦37h
Description This command will change the command type and
initialize the display.
The display emulation mode is based on DSP800/ ESC/
ADM 787/ POS7300/ AEDEX/ UTC/ CD5220 mode.
n Command Type n Command Type
30h DSP800 34h AEDEX
31h ESC/POS 35h UTC/P
32h POS7300 36h UTC/S
33h ADM 787 37h CD5220
8.5. Run Demo message
STX 05 D 08 ETX
/Run demo message/
ASCII Format STX 05 D 08 ETX
Dec. Format [02][05][68][08][03]
Hex. Format [02h][05h][44h][08h][03h]
Description Run demo message for the display.
The display emulation mode is based on DSP800,
EPSON ESC/POS, CD5220 command type.
8.6. Show Firmware Version
STX 05 V 01 ETX
/Show Firmware Version/
ASCII Format STX 05 V 01 ETX
Dec. Format [02][05][86][01][03]
Hex. Format [02h][05h][56h][01h][03h]
Description Show firmware version.