Setup guide

Setting Up the Printer

R4C3900

Rev. D

A5 size SETUP.FM

4/6/01 Pass 3

Proof Sign-off:

T.Ichihashi _______

M.Miyazaki _______

K.Norum _______

3. Remove the two screws securing the shield plate on the rear

of the printer; then remove the plate.

Note:

❏ You will need the screws to secure the printer interface board

later in this procedure.

❏ Keep the shield plate in a safe place. You will need to reattach it

if you remove the interface board later.

4. Open the printer cover and pull out the paper path unit at

least 10 cm (4 inches).