Specifications

Introduction

You can install the EpsonNet Internal Print Server 2 in any

EPSON

printer with a Type B interface slot, then connect the

printer directly to your network. The print server includes

installation and configuration software for easy setup on a variety

of Ethernet protocols. Additional utilities let you manage all your

network printers and print across the Internet.

The print server supports IEEE 802.2, IEEE 802.3, Ethernet II, and

Ethernet SNAP network protocols. Your users can print from

Microsoft

Windows,

Apple

Macintosh,

UNIX,

and

IBM

OS/2

applications.

New features of the print server include support for Windows

2000 IPP (Internet Printing Protocol), printer status pages, and

Port 9100. Because the print server supports the printer MIB (RFC

1759) standard, proxy response and SNMP settings such as SNMP

community, IP trap, and IPX trap are available with EpsonNet

WebAssist.

Following is a list of the software included with the EpsonNet

Internal Print Server 2.

Unless otherwise noted, instructions for installing and using the

software are provided in the online Administrator’s Manual.

❏ EpsonNet WinAssist or MacAssist

Lets you configure the print server for TCP/IP, NetWare,

NetBEUI, or AppleTalk.

™

See page 8 or 9 for installation and

startup instructions.

❏ EpsonNet WebAssist

Lets you configure the print server using your browser

(pre-installed on the print server card). See page 10 for a list

of supported browsers.

❏ EpsonNet WebManager

Provides printer management and monitoring features using

your browser across the Internet or your Intranet. See page 11

for details.

Starthere.book Page 5 Friday, May 18, 2001 11:51 AM