Specifications

9
Installing EpsonNet WinAssist
Before you install the software, make sure you set up the required
protocols and services in your operating system. If you install
EpsonNet WinAssist before you add or delete protocols or
services, the software may not work. You may need to uninstall
and then reinstall it. See the online Administrator’s Manual for
more information.
Follow these steps to install EpsonNet WinAssist:
1. Insert the CD-ROM in your drive. You see the EPSON
Installation Program window.
2. Select Install EpsonNet WinAssist, then follow the
instructions on the screen to install the program.
You can also run the SETUP program in the ENWINA\Disk1
folder on the CD-ROM.
EpsonNet MacAssist
The EpsonNet MacAssist program lets you configure the print
server for TCP/IP or AppleTalk ina Macintoshenvironment. This
section includes system requirements and installation
instructions for EpsonNet MacAssist. See the online
Administrator’s Manual for complete instructions on using
EpsonNet MacAssist.
System Requirements
Operating system System 7.1, 7.5x, Mac OS 7.6.x, 8.x, 9.x
CPU 68030 or better processor
Memory 6MB
Hard drive space 13MB
Starthere.book Page 9 Friday, May 18, 2001 11:51 AM