Specifications
Table Of Contents
- Important Information
- Front Matter
- Contents
- Introduction
- Basic Printing
- Advanced Printing
- Printing on Special Media
- Managing Print Jobs
- Network Printing
- Optional Interfaces
- Maintenance and Transportation
- Troubleshooting
- Specifications
- Index
Troubleshooting Page 155
Running a Printer Check
You can run a printer check to determine whether the problem comes
from the printer itself or some other source. Follow these steps:
1 Make sure both the printer and computer are turned off.
2 Disconnect the interface cable from the printer.
3 Make sure paper is loaded in the printer.
4 Hold down the
E load/eject button, then press and release the
Ppower
button. Continue holding down the
E load/eject button until the
Ppower light starts to flash, then release it.
The printer prints one page containing the printer’s ROM version, ink
counter code, and a nozzle check pattern. Only the nozzle check
pattern is shown below:
color900.book Page 155 Wednesday, January 6, 1999 12:39 PM