Specifications
Table Of Contents
- Important Information
- Front Matter
- Contents
- Introduction
- Basic Printing
- Advanced Printing
- Printing on Special Media
- Managing Print Jobs
- Network Printing
- Optional Interfaces
- Maintenance and Transportation
- Troubleshooting
- Specifications
- Index
Maintenance and Transportation Page 137
Examining the Nozzle Check Pattern
Examine the nozzle check pattern you print. It should look something like
this, with the lower pattern colored magenta, cyan, and yellow:
Each staggered horizontal and straight vertical line should be complete,
with no gaps in the dot pattern. If your printout looks okay, you’re done. If
any dots are missing, as shown below, clean the print head again; see
C
leaning the Print Head for instructions.
missing dots
missing dots
color900.book Page 137 Wednesday, January 6, 1999 12:39 PM