Setup guide
14
Assembling the Printer
Installing the Photoconductor Unit
Before installing the photoconductor unit, read the following
handling precautions:
❏ When installing the photoconductor unit, avoid exposing it
to room light any longer than necessary.
❏ Be sure not to scratch the surface of the drum. Also, avoid
touching the drum, since oil from your skin may permanently
damage its surface and affect print quality.
❏ Keep the photoconductor unit out of the reach of children.
Follow these steps to install the photoconductor unit:
1. Make sure the printer is turned off.
2. Open the front cover.