Service manual

EPSON Stylus Pro 10000/10000CF Revision B

Troubleshooting

roubleshooting Using the Messages 94

3.2.2 Errors

Error messages appear on the LCD to notify the user that the printer cannot print properly

under the current conditions. When an error message appears, printing stops and data

transfer from the host PC stops. (The parallel interface signal = /ERROR -> “LOW” and

BUSY -> “HIGH” and data cannot be entered.)

Table 3-8. No Ink Cartridge

Item Description

LCD message NO INK CARTRIDGE

LED indicator

status

Corresponded ink color LED goes On.

Explanation It is occurred when the ink cartridge is removed during printing.

Recovery Set the ink cartridge correctly.

Table 3-9. Paper End/End of roll

Item Description

LCD message PAPER OUT

LED indicator

status

Paper Out LED goes on

Explanation

This error occurs in following cases;

• None of paper set.

• The printer detects end of roll paper. In this time the paper feed roller

holds and keeps the end of roll paper.

• The printer prints out a sheet or detects end of sheet. In this time the paper

feed roller holds and keeps the end of sheet.

Recovery

• Set new paper.

• Remove the paper and set new one.

After setting the new paper, the error is cleared. If data remains, the printing

job will continue in the new paper.