Service manual

EPSON Stylus Pro 10000/10000CF Revision B
Product Description Maintenance Mode 2 55
Table 1-38. Maintenance Mode 2 Setup Items (Top menu)
Item Panel display
Counter indication menu VIEW COUNTERS MENU
Counter initialize menu CLEAR COUNTERS MENU
Adjustment / setup menu SERVICE CONFIG MENU
Maintenance information menu (TBD)
Table 1-39. Maintenance Mode 2 - (NVRAM) counter menu
Item Panel display Setup value
Ink remaining (K) counter value INK K
0~4294967295 (Decimal)
Ink remaining (C) counter value INK C
0~4294967295 (Decimal)
Ink remaining (M) counter value INK M
0~4294967295 (Decimal)
Ink remaining (LC) counter value INK LC
0~4294967295 (Decimal)
Ink remaining (LM) counter value INK LM
0~4294967295 (Decimal)
Ink remaining (Y) counter value INK Y
0~4294967295 (Decimal)
Cutter life counter value CUTTER
0~4294967295 (Decimal)
Cutter life total counter value CUTTER TOTAL
0~4294967295 (Decimal)
Total prints counter value TTL PAGES
0~4294967295 (Decimal)
Waste ink counter A value WAST.INK A
0~4294967295 (Decimal)
Waste ink counter B value WAST.INK B
0~4294967295 (Decimal)
CR motor life counter value CR MOTOR 0~4294967295 (Decimal)
CR motor life total counter value CR TOTAL
0~4294967295 (Decimal)
PF motor life counter value PF MOTOR
0~4294967295 (Decimal)
Head unit (K) life counter value HEAD K
0~4294967295 (Decimal)
Head unit (C) life counter value HEAD C
0~4294967295 (Decimal)
Head unit (M) life counter value HEAD M
0~4294967295 (Decimal)
Head unit (LC) life counter value HEAD LC
0~4294967295 (Decimal)
Head unit (LM) life counter value HEAD LM
0~4294967295 (Decimal)
Head unit (Y) life counter value HEAD Y
0~4294967295 (Decimal)
Cleaning unit life counter value CLEANER
0~4294967295 (Decimal)
Table 1-40. Maintenance mode 2 setup items (counter initialize menu)
Item Panel display Setup value
Initialize NVRAM, timer, life
counter, mechanical counter
INIT. ALL EXEC.
Initialize NVRAM INIT. NVRAM EXEC.
Initialize RTC RTC INIT <YY>/<MM>/<DD>/<HH>
Initialize cutter life total INIT. CUT TOTAL EXEC.
Initialize CR motor life INIT. CR MTR EXEC.
Initialize CR motor life total INIT. CR TOTAL EXEC.
Initialize PF motor life INIT. PF MTR EXEC.
Initialize head unit INIT. HEAD EXEC.
Initialize cleaning unit INIT. CLEANER EXEC.
Initialize total printed pages counter INIT. TTL PR EXEC.
Initialize ink capacity INIT. INK EXEC.
Initialize waste ink capacity INIT. WA. INK EXEC.
Clear head error CLR HEAD ERROR EXEC.
Table 1-41. Maintenance mode 2 setup items
Item Panel display Setup value
Bi-D offset setting #1
(VSD1, 240CPS, Small)
BID OFFSET #1 -4~0
~+4
Bi-D offset setting #2
(VSD2, 300CPS, Large)
BID OFFSET #2 -4~0~+4
CSIC detection level ED MODE ON
,O/N/X
Fatal nozzle limit (Dye) NZLD 0~2 ~45
Fatal nozzle limit (Pigment) NZLD 0 ~2 ~45
Table 1-39. Maintenance Mode 2 - (NVRAM) counter menu
Item Panel display Setup value