Service manual

EPSON Stylus Pro 10000/10000CF Revision B
Product Description
S
e
lecType Settings 47
1.6.4 User Paper Setup Menu Items
*1 When Standard paper is selected, the items of paper thickness detection pattern print and
paper thickness selected number are not displayed. Only when paper 1~4 are selected, they
are displayed.
*2 The default display for the paper thickness number is the number used with the paper
thickness for which the gap was adjusted.
*3 It displays "PAT. PRINTING" during printing pattern.
1.6.4.1 Detecting Paper Thickness
This option allows the user to detect the thickness of available paper, and register up to four
user-defined paper types. Ink drying time can also be registered.
1. Load a sheet of A4 or larger size paper.
2. Press the SelecType button to enter SelecType mode.
3. Select the Paper Config. menu, and press the Item button.
4. Select PAPER NUMBER, one of STD and four types. (If you use EPSON media,
select STD.)
Ink remaining (LC) INK LEFT-LC
0%,nn%,E*F,E****F,E***F,E****
F,E*****F
Ink remaining (LM) INK LEFT-LM
0%,nn%,E*F,E****F,E***F,E****
F,E*****F
Ink remaining (Y) INK LEFT-Y
0%,nn%,E*F,E****F,E***F,E****
F,E*****F
Cutter life monitor CUTTER LIFE
F E,F *E,F **E,F ***E,F
****E,F*****E
Total number of documents
printed
TOTAL PRINTS
nnnnnn
Waste ink count WASTE INK
F E,F *E,F **E,F ***E,F
****E,F*****E
CR motor life monitor CR MOTOR
F E,F *E,F **E,F ***E,F
****E,F*****Es
PF motor life monitor PF MOTOR
F E,F *E,F **E,F ***E,F
****E,F*****E
Head unit life monitor HEAD UNIT
F E,F *E,F **E,F ***E,F
****E,F*****E
Cleaning unit life monitor CLEANER
F E,F *E,F **E,F ***E,F
****E,F*****E
Table 1-31. Printer Status Menu
Items LCD panel display Values
Table 1-32. Paper Setup Menu
Items LCD panel display Values
Paper select PAPER NUMBER
STD
,1~4 *1
Print paper thickness detection pattern THICK. PAT.
PRINT *3
Select paper thickness number PAPER THICK. NO.
1~17 *2
Inkdryingtime DRYING TIME
0MIN~30 MIN
Vacuum SUCTION
NORM
,LOW