Service manual

EPSON Stylus Pro 10000/10000CF Revision B
Product Description
O
perating Panel 40
1.4.1 Indicator Status in Normal Mode
Table 1-22. Operate Indicator
Printer Status Indicator
With power on and in any status other than
those listed below.
On
While processing data and during power off
sequence
Blink
Fatal error Blink
Reset, timer IC reset/NVRAM clear On
Table 1-23. Paper Out Indicator
Printer Status Indicator
Out of paper, end of roll On
Roll paper and sheet sizes are different On
Paper set lever in release position On
Paper is too thick to perform cleaning On
Paper jam Blink
Paper cutting error Blink
Paper not straight Blink
Paper check error Blink
Problem with paper output (sheet) Blink
Fatal error Blink
Reset, timer IC reset/NVRAM clear On
Maintenance call
On for 100ms at intervals
of 5 seconds
Table 1-24. Pause Indicator
Printer Status Indicator
Print ready Off
In SelecType mode Off
During pause Off
During ink drying time Blink
During ink sequence Blink
Other errors Off
Fatal error Blink
Reset, timer IC reset/NVRAM clear On
Table 1-25. Ink Out Indicators
Printer Status Indicator
Out of specified ink
No cartridge for specified ink
Wrong cartridge for specified ink
Illegal cartridge for specified ink
On
Ink level low Blink
Fatal error Blink
Reset, timer IC reset/NVRAM clear On
Table 1-26. Paper Source Indicator
Printer Status Indicator
Selected paper source On
Fatal error Blink
Difference with roll paper and sheet Blink
Reset, timer IC reset/NVRAM clear On