Service manual

EPSON Stylus Pro 10000/10000CF Revision B
Adjustment
S
elf-Diagnostics
2
74
5.3.8.11 Total reliability
Perform the CR axis (motor, bearing, tube etc.), the PF axis, the CR axis + the PF axis, the
head up / down motor, the head lock, and the cutter solenoid simultaneous reliability test.
When the reliability number is [-1], reliability is repeated until [Pause] key is input.
When the reliability number is [-1], the biggest count number is 99,999,999 times (within 8
column), and the count become 0 in the case that this is exceeded.
Following figure showing the total reliability test menu sequence.
Figure 5-108.
o
As for the parameter of CW, [240CPS], [300CPS], [400CPS], and [800CPS] are
possible select.
o As for the parameter of CCW, [240CPS], [300CPS], [400CPS], and [800CPS] are
possible select.
Enter
End : 100
Count CR PF : 50
LifeCount:-1
CR+PF Motor : 100
Speed CCW :240CPS
Speed CCW :240CPS
FeedAmount:3.0mm
Count CR PF : 10
Adjustable with "Paper Feed +/-" key.
Adjustable with "Paper Feed +/-" key.
Adjustable with "Paper Feed +/-" key.
Adjustable with "Paper Feed +/-" key.
Adjustable with "Paper Feed +/-" key.
Enter
Enter
Enter
Enter