Service manual

EPSON Stylus Pro 10000/10000CF Revision B
Adjustment
S
elf-Diagnostics
2
57
Table 5-20. Initialize items
Item Description
Init. All
Number of CR Motor movement.
Distance of PF Motor movement.
Number of head1 ink injection (K,C)
Number of head2 ink injection (LC,LM)
Number of head3 ink injection (M,Y)
Number of cleaning.
Print count
Ink counter
Sub tank ink counter
Ink cartridge counter
Initial charge information with attached cartridge.
Ink end detection flag
Waste ink counter
Number of cut
All initialize Gap adjustment value
CR home correction value (Capping position)
PF home correction value
Head slide home correction value
Front sensor position correction value
Rear sensor position correction value
Edge sensor vertical position correction value
Edge sensor horizontal position correction value
Cutter vertical position correction value
Cutter horizontal position correction value
Flashing position
PF distance correction 1~3
Serial number
Number of wiping (each head)
Number of rubbing (each head)
Number of ink tube movement
Number of paper set lever Up/Down
Initialize capping position CR home position correction value (capping position)
Initialize PF resolution PF distance correction value1~3
Initialize Serial number Serial number
Initialize head1 history Number of head 1 injection (K,C)
Initialize head2 history Number of head 2 injection (LC,LM)
Initialize head3 history Number of head 3 injection (M.Y)
Initialize wiping history Number of wiping (each head)
Initialize rubbing history Number of rubbing (each head)
Initialize waste ink history Waste ink counter
Initialize CR motor history Number of CR motor movement
Initialize PF motor history Number of PF motor movement
Initialize Lever history Number of paper set lever Up/Down
Initialize Cover history Number of cover Open/Close
Initialize Ink cover history Number of Ink cover Open/Close
Table 5-20. Initialize items
Item Description