Service manual

EPSON Stylus Pro 10000/10000CF Revision B

Adjustment

elf-Diagnostics

5.3.4.16 Print head cleaning

This is the item that is carried out at the time of the end of the production process or before

the head exchange.

Following figure showing the head washing menu sequence.

Figure 5-77.

Enter

Set Discharge I/C

Set Wash I/C

Ink Blowing

Set Discharge I/C

Head washing

Washing liquid Blowing

Adj : Counter Clear

Skip the Ink Blowing

Skip the Head Washing

Endwith"Enter"key.

C A U T I O N

n Do not carry out the counter clear of the menu that is displayed

at the end of the head washing.

n If the "Adjustment counter clear" was displayed, turn off the

power supply of the printer and get out of from the self

diagnostic operation mode.

Reason: Even the binding of the dye/paint is cleared by the

counter clear. After then, the printer becomes dye/paint selecting

condition, in the case that there is not the ink cartridge for

starter and you can not go ahead previously.