Service manual

EPSON Stylus Pro 10000/10000CF Revision B
Adjustment
S
elf-Diagnostics
2
47
5.3.4.13 Top and Bottom adjustment
Perform the printing and form cut then input the distance of front sensor-head, cutter-head,
edge sensor 0-head (print beginning position) in order to adjust the top, bottom and side
margin. Following figure showing menu sequence and Figure 5-69 showing print pattern.
Figure 5-72.
o
Shift to the "Top and Bottom" menu by pressing the "Pause" key during the input
screen display.
o Shift to the "Bottom length" or "Side margin "menu by pressing the "Enter" at the
input screen of "Top length "k or "Bottom length".
o Shift to the "RearSen.Pos.: xxmm" menu by pressing "Enter" key during the input
screen of "Side margin".
Front: Correction pattern for cutter-head length.
Adjustment item: Top margin (Front sensor position) /Bottom margin (Cutter position) /
Side margin (print beginning position)
Printing method: Uni-d one pass with black color at 180dpi resolution.
Figure 5-73.
Item
Item
Item
SelecType
SelecType
SelecType
Printing Pattern
Top Length : 3.0mm
Bottom Length : 14.0mm
Side Margin : 3.0mm
Adjustable with "Paper Feed +/-
"keyatunitof0.1mm.
Adjustable with "Paper Feed +/-
"keyatunitof0.1mm.
Adjustable with "Paper Feed +/-
"keyatunitof0.1mm.
Bottom length
Top length
Side margin
Paper
Feed