Service manual

EPSON Stylus Pro 10000/10000CF Revision B
Adjustment
S
elf-Diagnostics
2
46
5.3.4.12 Feed adjustment
Perform the distance revision in the paper conveyance.Print the line pattern in direction of
paper feeding and input the distance in order to decide the PF encoder resolution by
firmware. Figure 5-70, "" showing adjustment menu. showing menu sequence and
Following figure showing print pattern.
Figure 5-70.
<Print pattern>
Adjustment item: Paper feed length
Printing method: Length 1000mm/ Two pass
with Uni-D at 720dpi resolution for CR and
360 dpi for PF.
Figure 5-71.
Enter
Enter
Enter
Enter
Start the print with "Enter" key.
Printing Pattern
V Length : +1000.000mm
Start the print with "Enter" key.
Printing Pattern
Press the [Pause] key to select
the [V Length] input menu.
Press the [Pause] key to select
the [Top & Bottom] menu.
Adjustable with "Paper Feed +/-
"keyatunitof0.001mm.