Service manual

EPSON Stylus Pro 10000/10000CF Revision B

Adjustment

elf-Diagnostics

5.3.4.11 Head LR (Head gap) adjustment

Correct the head to head gap.Print the test pattern with Uni-D mode and make sure the print

quality by referencing the Figure 5-69, "" then input the correction value

Following

able showing adjustment menu. Figure 5-67, "" showing menu sequence and

Following figure showing print pattern.

Figure 5-67.

Table 5-15.

Item Description

Gap 240. V1 .C 240 CPS with cyan ink.

Gap240.V1.M

240 CPS with magenta ink.

Gap 240 . V1 .LC 240 CPS with light cyan ink

Gap240.V1.LM

240 CPS with light magenta ink.

Gap240.V1.Y 240CPSwithyellowink.

Gap300.V1.C 300CPSwithcyanink.

Gap300.V1M 300 CPS with magenta ink.

Gap 300 . V1 .LC 300 CPS with light cyan ink.

Gap300.V1.LM 300 CPS with light magenta ink.

Gap 300 . V1 Y 300 CPS with yellow ink.

Item

SelecType

Enter

Start the print with "Enter" key.

Printing Pattern

Gap 240.V1.C 0

Gap 240.V1.M 0

Gap 240.V1.LC 0

Gap 240.V1.LM 0

Gap 240.V1.Y 0

Gap 300.V2.C 0