Service manual

EPSON Stylus Pro 10000/10000CF Revision B

Adjustment

elf-Diagnostics

5.3.4.9 B123 slant adjustment

Print the test pattern and make sure the print quality by referencing the Figure 5-62, "". If

the slant condition is presented, perform the mechanical adjustment.

This test using B1,B2 and B3 nozzle.

Following figure showing menu sequence.

Figure 5-62.

1.Check items: Cyan lines, Light Magenta lines and Yellow lines are continue as same level

by a magnifying glass with scale.

2.Printing method.

o One pass with Uni-D at 360dpi resolution for CR and 45 dpi for PF.

Figure 5-63.

Item

SelecType

Enter

Printing Pattern

Adjust the slant?

Wait a moment

Endwith"Pause"key.

B123 Slant Check End

Output Pattern

Shift to "B123 Slant Check End"

menu by pressing "Pause" key.

Shift to "Bi-D" adjustment or "B123"

slant check menu with following key

operation.

"Enter" key : Bi-D adjustment.

"Pause" key : B123 slant check.

Shift to"B123" slant check menu with

"Pause" key.

Print out the pattern with "Enter" key.

LM Y YLMC

When check the slant, regard the joint

department shown here.