Service manual

EPSON Stylus Pro 10000/10000CF Revision B

Adjustment

elf-Diagnostics

5.3.4.8 A123 slant adjustment

Print the test pattern and make sure the print quality by referencing the Figure 5-60, "". If

the slant condition is presented, perform the mechanical adjustment.

This test using A1,A2 and A3 nozzle.

Following figure showing menu sequence.

Figure 5-60.

1.Check items: Black lines, Light Cyan lines and Magenta lines are continue as same level

by a magnifying glass with scale.

2.Printing method.

o One pass with Uni-D at 360dpi resolution for CR and 45 dpi for PF.

Figure 5-61.

Item

SelecType

Enter

Printing Pattern

Adjust the slant?

Wait a moment

Endwith"Pause"key.

Output Pattern

A13 Slant Check End

Shift to "A123 Slant Check End"

menu by pressing "Pause" key.

Shift to "B123" or "A123" slant check

menu with following key operation.

"Enter" key: B123 slant check.

"Pause" key: A123 slant check.

Shift to"A123" slant check menu with

"Pause" key.

Print out the pattern with "Enter"

LC M MLCK

When check the slant, regard the joint

department shown here.