Service manual

EPSON Stylus Pro 10000/10000CF Revision B

Adjustment

elf-Diagnostics

5.3.4.7 A13 slant adjustment

Print the test pattern and make sure the print quality by referencing the Figure 5-58, "". If

the slant condition is presented, perform the mechanical adjustment.

This test using A1 and A3 nozzle.

Following figure showing menu sequence.

Figure 5-58.

1.Check items: Black lines and Magenta lines are continue as same level by a magnifying

glass with scale.

2.Printing method.

o One pass with Uni-D at 360dpi resolution for CR and 45 dpi for PF.1

Figure 5-59.

Shift to "A123 Slant Check End"

menu by pressing "Pause" key.

SelecType

Enter

Printing Pattern

Wait a moment

Adjust the slant?

Endwith"Pause"key.

A13 Slant Check End

Wait a moment

Output Pattern

Shift to "A123" or "A13" slant check

menu with following key operation.

"Enter" key : A123 slant check.

"Pause" key : A13 slant check.

Shift to"A13" slant check menu with

"Pause" key.

Print out the pattern with "Enter" key.

When check the slant, regard the joint

department shown here.