Service manual

EPSON Stylus Pro 10000/10000CF Revision B
Adjustment
S
elf-Diagnostics
2
31
o
INPUT LINE SELECTION
Mode for the input line selection.Figure 5-45, "" showing line number selection menu.
Figure 5-45.
o
Code input for each lines.
Mode for the input at all lines.Cursor is appeared under the input column.
Following figure showing sequence.
Figure 5-46.
Item
Item
Item
Item
Item
SelecType
SelecType
SelecType
SelecType
SelecType
Head 1-1
Head 1-2
Head 1-3
Head 1-4
Head 1-5
Press the [Enter] key to select
the code input mode of 1st line.
Press the [Enter] key to select
the code input mode of 2nd line.
Press the [Enter] key to select
the code input mode of 3rd line.
Press the [Enter] key to select
the code input mode of 4th line.
Press the [Enter] key to select
the code input mode of 5th line.
Select the proper value
with [Paper Feed+/-] key.
Enter
Enter
Enter
(Head 1-1) 5
147403
(Head 1-1) 5 1
47403
(Head 1-1) 5 1 4
7403
(Head1-1)5147
403
(Head1-1)51474
03
Pause key Input End
Wait
Exc. Enter Key Fill
Please Set Ink
Ink Charge
Select the proper value
with [Paper Feed+/-] key.
Select the proper value
with [Paper Feed+/-] key.
Select the proper value
with [Paper Feed+/-] key.
Select the proper value
with [Paper Feed+/-] key.
Press the [Enter] key to select
the Adjust top menu.
Press the [Enter] key to select
the Adjust top menu.
Press the [Enter] key to select
the Adjust top menu.
Display when the cartridge is not set.