Service manual

EPSON Stylus Pro 10000/10000CF Revision B
Adjustment
S
elf-Diagnostics
2
29
5.3.4.3 Head Rank input
Head rank is the characteristic of the head and each head has own value (QR code). This
value is used for determination of head drive voltage and temperature correction in order to
obtain a fine print quality.
Following figure showing input menu.
Figure 5-41.
QR CODE INPUT
Mode for the QR code input.
Following figure showing QR code input menu.
Figure 5-42.
o
"Pause" key initiate the "Input QR Code" menu.
o Input is ended when 3 head are input.
o After the ink charge, it goes top menu of adjustment.
o If the error condition is presented, retry it again from head 1 input.
C A U T I O N
n This head rank input way is for production line by a special bar
code reader.
n For service, you should perform head rank input by panel input.
Press the [Enter] key to QR
code receive mode on line.
Item
Item
SelecType
SelecType
Rank Input : QR code
Rank Input : Panel
Press the [Enter] key to code
input mode with the panel.
Press the [Enter] key to [Rank input]
display, but pay attention because rank
is renewed.
Display when the cartridge is not set.
Enter
Enter
Enter
Wait
Input QR Code
Endwith"Pause"key
Exc. Enter Fill
Wait
Please Set Ink
Ink Charge
Error! Rank Input
Finish the head movement
Input value is valid
Pause
Finish the head movement