Service manual

EPSON Stylus Pro 10000/10000CF Revision B
Adjustment
S
elf-Diagnostics
2
28
5.3.4.1 Adjustment menu
Following figure showing adjustment menu sequence.
Figure 5-39.
5.3.4.2 Paper Skew
Feed the paper and check the paper edge position with the P_Edge sensor, then compare the
difference between start position and stopped position.The result is displayed on the LCD
screen.
Finish the skew test by depressing "Pause" key at standby state.
Following figure showing skew menu sequence.
Figure 5-40.
o
The skew value is determined at the first edge detection at left side of paper.
o Pull the paper release lever toward up when the "Paper Out" LED indicator is light
or blinking.(Above LED indication means paper detection error.)
o Panel key operation is as follows:
Enter: Go to the "Adj: Input Rank" menu.
Pause: Go to the "Adj: Check Skew"
All keys are inactive during the skew check operation.
Adj : Check Skew
Adj : Input Rank
Adj : Check Nozzle
Adj:OffsetAdj
Adj : Det, Res.
Adj : A13 Slant
Adj : A123 Slant
Adj : B123 Slant
Adj:Bi-d
Adj:Head_LR
Adj:FeedAdj
Adj:Top&Bottom
Adj : Rear Sensor Pos.
Adj:TestPrint
Adj : Clean Head
Adj : Counter Clear
Enter
Pause
Item
Item
Item
Item
Item
Item
Item
Item
Item
Item
Item
Item
Item
Item
Item
Item
Paper skew
Enter
Check Skew 1.0m
Exc. Skew
Skew Result : xxxx mm
Select the proper value
with [Paper Feed+/-] key.