Service manual

EPSON Stylus Pro 10000/10000CF Revision B
Adjustment
S
elf-Diagnostics
2
23
3. Correction data input screen. Screen for the "Va" to" Vd" input.
Following figure showing screen menu sequence.
Figure 5-31.
o
Cursor is displayed to the column that is inputting at present.
o When [SelecType] key is pushed the cursor migrates to the right.
o When [Item] key is pushed the cursor migrates to the left.
o When the [Enter] key is pushed display moves to the menu next to 1 hierarchy.
o When the [Pause] key is pushed the display returns to 1 hierarchy.
o When the [Enter] key is pushed during the correction value input of [Vd], D/A
correction value of the color settles and display moves to [K measure Va] of 1
hierarchy.
4. Selection of the parameter
Select the voltage parameter for "Va" to" Vd".
Following figure showing parameter menu sequence.
Figure 5-32.
Select the value with
Paper Feed +/- key
Item
Item
Item
Item
Item
SelecType
SelecType
SelecType
SelecType
SelecType
K Measure Va : xx.xxxV
K Measure Vb : xx.xxxV
K MeasureVc : xx.xxxV
K Measure Vd : xx.xxxV
K Measure Va : xx.xxxV
Item
Item
Item
Item
SelecType
SelecType
SelecType
SelecType
Enter
Enter
Enter
Enter
Pause
Pause
Pause
Pause
KMeasureVa
K Measure Vb
K Measure Vc
K Measure Vd
KVa Out outd
KVb Out outd
KVc Out outd
KVd Out outd