Service manual

EPSON Stylus Pro 10000/10000CF Revision B
Adjustment
S
elf-Diagnostics
2
17
5.3.3.3 Panel
Test the key, LCD and LED on the panel.
Following table showing panel test sequence.
Figure 5-20. Panel test sequence
o
Key name is displayed when you perform the panel key test.
o The panel key test is ended when you push the [Pause] key twice.
o LED name is displayed on LCD when you perform the LED check.
Display sequence is Operate-Pause-K-C-M-LC-LM-Y-Paper Out-Auto cut-Sheet
5.3.3.4 Sensor
Display the sensor condition. Table 5-19 showing sensor test menu sequence. When
entering the sensor menu, place the carriage to the home position and perform the carriage
lock.
Figure 5-21. Sensor menu sequence
Panel : Key
Panel : LCD
Panel : LED Panel : LED xxxx
Panel : Key xxxxx
Sen :Compress xxxx
Sen :CROrigin xx
Sen:CAPOriginxx
Sen :Supply Origin xx
Sen :Cover xxxxx
Sen :Lever xxxx
Sen :Sutter Org xx
Sen :Paper xxx
Sen :HeadSlide xx
Sen :INK NOT xxxxxx
Sen:InkCover xxxx
Sen :Edge AD xxxxxx
Sen :Front AD xxxxxx
Sen :Rear AD xxxxxx
Sen :Leq, Lev xxxxxx
Sen :Head Temp xxx
Sen :Drv. Temp xxx
Sen :Lasr xxxx
Sen :TAKE UP xxx
Item
Select Type
Select Type
Select Type
Select Type
Select Type
Select Type
Select Type
Select Type
Select Type
Select Type
Select Type
Select Type
Select Type
Select Type
Select Type
Select Type
Select Type
Select Type
Select Type
Item
Item
Item
Item
Item
Item
Item
Item
Item
Item
Item
Item
Item
Item
Item
Item
Item
Item