Service manual

EPSON Stylus Pro 10000/10000CF Revision B
Product Description
S
pecifications 21
1.2.4.3 Printable area
The list and figure shown below.
-The printer detects paper width when paper is set. (If Set paper width detection is OFF, it
doesn’t detect paper width.)
-It doesn’t print the image beyond printable area specified with paper size setting or paper width
detection. (It may print on the platen if Set paper width detection is OFF.)
-Margins of roll paper can be changed with the panel as following;
Top/bottom 15mm, left/right 3mm
Top/bottom/left/right 3mm
Top/bottom/left/right 15mm
Figure 1-1. Printable Area
Table 1-7.
Heading Roll Paper Cut Sheets
PW (width) 210 ~1118mm 210 ~ 1118mm
PL (length) Max. 202mm 279~1580mm
LM (left margin) 3mm/15mm*1 3mm
RM(Rightlmargin) 3mm/15mm*1 3mm
TM (top margin) 3mm/15mm*1 3mm
BM (bottom) 3mm/15mm*1 14mm
RM
Printable area
PW
LM
BM
TM
PL