Service manual

EPSON Stylus Pro 10000/10000CF Revision B
Adjustment
S
elf-Diagnostics
2
08
5.3 Self-Diagnostics
Self diagnostics has function of mechanism adjustment and also firmware adjustment
parameter. The function is incorporated to the firmware and available them with specific
button pushing at the power on.
During the normal operation mode, it is impossible to change the mode to self-
diagnostic.The self-diagnostic function menu is shown on the Table 5-9, “Self-Diagnostic
Mode Controls,” on page 208 and Table 5-10, “Self-Diagnostic Menu Stratum,” on
page 208. a
Table 5-9. Self-Diagnostic Mode Controls
Item Description
Check
Version,Panel,Sensor,Encorder,Fan,History,D/A correction, CSIC,
Actuator
Adjustment
Head department adjustment, Sensor position adjustment, Paper feed
correction
Cleaning Four mode of cleaning
Print Check pattern, adjustment variables
Parameter Initialize/Update/Display the NVRAM,
Life
CR Motor, PF Motor, Cutter, Head up and down, Carriage lock Lever
lock, Cleaning, Print, Shutter, etc.,
Table 5-10. Self-Diagnostic Menu Stratum
Hierarchy1 Hierarchy2 Hierarchy3 Hierarchy4 Hierarchy5
Check
Version
I/F - -
Engine - -
I/F - -
Engine - -
ESCP/3 - -
Parameter 1 - -
Parameter 2 - -
Dips - -
Main Rev. - -
Panel Rev. - -
Panel
key - -
LCD - -
LCD - -
Sensor
- -
CR home - -
Cap home - -
Power supply - -
Cover - -
Lever - -
Shutter home - -
Paper thick - -
Head slide - -
Ink Not - -
Ink cover - -
Edge AD - -