Service manual

EPSON Stylus Pro 10000/10000CF Revision A
Disassembly & assembly Disassembly Flow
1
76
6. Remove right side two screw (M4x6) and front upper side two screw ( M4x6), then
remove the Paper Hold Solenoid with bracket.
Figure 4-147.
7. Remove one screw (M3x6) securing solenoid armature.
8. Remove two screws (M3x6) securing solenoid coil, then remove the Paper Hold
solenoid.
Figure 4-148.
Solenoid
Screw
Screw
Screw
Screw for armature
C H E C K
P O I N T
When installing the Paper Hold Solenoid, make sure the lock lever
move smoothly. Otherwise loosen the armature screw and secure it
again.
Figure 4-149.
Look lever