Service manual

EPSON Stylus Pro 10000/10000CF Revision A
Disassembly & assembly Disassembly Flow
1
68
4. Disconnect the cable connector connected to CN10 on the CSIC board.
Figure 4-126.
5. Pull out three waste ink tubes from tube.
Figure 4-127.
6. Lift up the ink pump ASSY to release the carriage lock, and move the carriage away
from the home position.
Figure 4-128.
7. Hold the Cleaning Unit with your hand then remove two screws ( :M4x8)
securing Cleaning Unit to the CR guide rail.
Figure 4-129.
CSIC board
CN10
Waste ink tube
Tube
CR Guide rail
Cleaning Unit
Screw
Bracket
Cap motor