Service manual

EPSON Stylus Pro 10000/10000CF Revision A
Disassembly & assembly Disassembly Flow
1
62
8. Remove two screws ( M3x8) securing ink cartridge holder.
Figure 4-110.
9. Remove the ink cartridge holder to the rear side.
C A U T I O N
Some of ink will remain in the tube. Proceeding to the nut removal,
put the waste paper or similar to the nut for leakage ink
absorption.
Screw
Screw
C A U T I O N
Some of ink will remain in the tube, proceeding to the nut removal,
put the waste paper or similar to the nut for leakage ink
absorption.
Do not lose the O-ring between the tube and nut.
Figure 4-111.
O-ring