Service manual

EPSON Stylus Pro 10000/10000CF Revision A

Disassembly & assembly Disassembly Flow

4. Remove the two screws (CP(W):M3x6) securing the carriage cover and remove the

carriage cover.

Figure 4-83.

5. Sticking the nut that is jointed to the pipe on the tube pipe fixed plate with the gum tape

etc. to avoids missing the pipe.

Figure 4-84.

6. Loosening the nut on the side of the tube, while holding down the nut part, such that

the nut on the side of the metal pipe that fixed it with the tape does not get loose we

remove the pipe.

Figure 4-85.

Carridge cover

Screw

(Left side view)

(Right side view)

Fix with the gum tape

C A U T I O N

When loosen the nut, do the measure so as not to get dirty with the rag

etc. because there is the possibility that the remaining ink leaks from

metal pipe side and tube side.