Service manual

EPSON Stylus Pro 10000/10000CF Revision A
Disassembly & assembly Disassembly Flow
1
47
6. Remove each two screws fixing the Roller unit (5 pieces), and remove the Roller unit.
Figure 4-71.
7. Remove ten screws (3x8), then push up the five Sub Platens and remove it.
Figure 4-72.
8. Loose the Fan cable and shutter fan cable fixing nuts and make cables free.
Figure 4-73.
Screw
Screw
Sub Platen
Suction location detect
sensor cable
Fan Cable