Service manual

EPSON Stylus Pro 10000/10000CF Revision A
Disassembly & assembly Disassembly Flow
1
44
3. Remove the two waste ink tubes from the tubes clamps. After the removal, put the
tubes on the waste ink pad preventing from ink leakage.
Figure 4-65.
4. At the bottom side, pull (unlock) the two tabs of ink box and slide the ink box toward you.
Figure 4-66.
Connect to the flushing box.
Connect to the pump ASSY.
(Front side view)
(Bottom side view)
Tab
(Top side view) (Bottom side view)
(Bottom side view)
Tab
Tab