Service manual

EPSON Stylus Pro 10000/10000CF Revision A
Disassembly & assembly Disassembly Flow
1
35
3. Remove one screw (CS:M3 x 6 ) then remove the board ASSY.
Figure 4-45.
4.2.2.3 C362MAIN Board Removal
1. Remove the HJFK / Dummy Board on the I/F bracket.
2. Remove eight screws on the I/F bracket, then remove the I/F bracket and two earth
plate.
Figure 4-46.
3. Remove six screws on the “Interface Board”.
Figure 4-47.
Screw
Screw
Screw
Earth plate
Screw
Screw