Service manual

EPSON Stylus Pro 10000/10000CF Revision A
Disassembly & assembly Disassembly Flow
1
24
4.2.1.4 R Side Cover Removal
1. Remove the panel unit and H Top Cover. (Refer to “Panel Unit Removal 120. and “H
Top Cover Removal 123.)
2. Remove rear side two white screws (CS:M4x8).
Figure 4-14.
3. Remove right side two white screws (CS:M4x8).
Figure 4-15.
4. Slide the R side cover to the right and remove it.
4.2.1.5 L Side Cover Removal
1. Remove the H Top Cover as described in paragraph 4.2.1.3 (“H Top Cover Removal”).
2. Remove rear side two white screws (CS:M4x8).
Figure 4-16.
3. Remove left side three white screws (CS:M4x8).
Figure 4-17.
Screw (Rear)
Screw (Right)
Screw
Screw