Specifications

Using the Ethernet Card with NetWare 4-39
Using a print server at a dial-up destination (remote)
❏ When the power is turned on
The computer dials out because access is made to a local file
server first and then to a primary server. There is no problem
since this occurs only once at power on.
❏ When the Ethernet card is not set up correctly
The computer dials out because access is made to a local file
server first and then to a primary server. It dials out repeatedly
at intervals of approximately 5 minutes. Use the correct Ethernet
card settings to avoid this phenomenon.
❏ During normal operation (standby)
An SPX Watchdog packet is sent according to the NetWare
protocol convention. Use a router with a vicarious response
function to avoid dialing out unintentionally.
❏ During normal operation (printing)
The computer dials out while the print data is being transferred.
❏ When the primary server is down during printer operation
The computer dials out because connection to the primary server
is attempted periodically. Since this is attributable to the
automatic re-connection function, turn off the printer until the
primary server is restored.
Chap4.fm Page 39 Friday, August 21, 1998 1:05 PM