Specifications

Using the Ethernet Card with NetWare 4-23
Note:
❑ If you have connected more than one printer with the same type of
Ethernet card to the network, you can identify the cards by their
MAC addresses. To view a card’s MAC address, press the status
sheet button on the card for three seconds. See Chapter 1 for
details.
❑ If the IP address is set to the default IP address, the printer model
might not appear.
4. Click the NetWare Basic tab and make the following settings.
Frame type:
Select one from the following: Auto, Ethernet 802.2,
Ethernet 802.3, Ethernet II, or Ethernet SNAP.
Mode:
Select Print Server.
NDS:
Select Enable or Disable.
NDS Tree Name:
If you are using NDS mode, type the same name you used in
Nwadmin (up to 31 characters).
Chap4.fm Page 23 Friday, August 21, 1998 1:05 PM