Specifications

Setting the IP Address 3-7
3. If you continue installing the TCP/IP protocol, the TCP/IP
Configuration dialog box appears, and you can set the IP address.
(Ask your network administrator for your IP address.)
Note:
❑ NT 3.51
To check the IP addresses which have already been assigned, select
TCP/IP Protocol in the Network Settings dialog box. Click the
Configure button to open the TCP/IP Configuration dialog box.
❑ NT 4.0
To check the IP addresses which have already been assigned, click
the Protocols tab in the Network dialog box, select TCP/IP
Protocol, and then click the Properties button.
4. When the installation is complete, check items such as the IP
address to make sure they have been entered correctly.
Chap3.fm Page 7 Friday, August 21, 1998 11:11 AM