Specifications

12-2 Troubleshooting
Note:
If you have a direct connection to the Internet (not dial-up), you may need
to apply to the InterNIC to obtain an IP address. Ask your system
administrator for more information.
You are unable to start EPSON Net!2 for Windows.
Cause What to do
You have added or deleted
protocols after installing
EPSON Net!2 for Windows.
Uninstall EPSON Net!2 for Windows
and reinstall it.
The message “NetWare cannot be used” appears when you start
EPSON Net!2.
Cause What to do
There is no NetWare server. You may disregard it if you are using
a TCP/IP environment to print. Click
OK to start EPSON Net!2 for
Windows.
You are unable to make settings using EPSON Net!2 for Intranet.
Cause What to do
You haven’t set the IP address
for the Ethernet card.
Set the IP address for the Ethernet
card using EPSON Net!2 for
Windows/Macintosh or the arp
command, as described in Chapter 3.
You can check the IP address on the
status sheet.
Chap12.fm Page 2 Friday, August 21, 1998 2:00 PM